English
DeutschCell Multiplexer
A Multiplexer is used to connect one of different inputs to the oputput. The selection is done by another input channel.
| Field | Description |
|---|---|
| Select | Follows the same input thresholds as the threelevel cell. |
| Input Low | route this input to the output if the select input is below -65% |
| Input center | route this input to the output if the select input is between -65% and + 65% |
| Input High | route this input to the output if the select input is above 65% |
Examples
Always if different modes shall be available, signals can be preprocessed differently, and the switched by any switch to the final result. Very useful if the flightmodes neede different mixing.