Languages
English
DeutschVBar Control Touch
VBar NEO/EVO
- VBar NEO/EVO Information
- VBar NEO/EVO FAQ
- Hints for conversions or new users
- NEO/EVO Express
- NEO/EVO Professional
- NEO/EVO Pro Rescue
- Add VLink (NEO only)
- Version overview
- Building Tips
- Logo 550 SE
- Logo 800 XXTreme
- General Tweaking Order
- Henseleit TDR 2
- Vario Acrobatic Gasser
- Electric Gov Setup
- Nitro Gov setup
- Scale Heli Setup
- Basically thing
- Step 01: Setup Start
- Step 02: Swashplate
- Step 03: Collective throw
- Step 04: Cyclic calibration
- Step 05: Tail adjustments
- Step 06a: ESC with Telemetry
- Step 06b: Turbine with Telemetry
- Check before Maiden Flight
- Flight tuning Swashplate
- Filght tuning Tail
- Flight tuning VBar Governor
- After first flights
- VBar EVO additional Information
- VBar NEO/EVO Manual
- VBar NEO/EVO Downloads
- VBar NEO/EVO Videos
- General Support Overview
VBar Control
- VBar Control Information
- VBar Control Manual
- Device Manual
- VBasic Manual
- Heli Manual
- Plane Manual
- VCopter
- Basic Apps
- Extension Apps
- Setup Apps
- Telemetry Apps
- Timer Apps
- Voice Apps
- VBar Control Downloads
- VBar Control Videos
- VBar Control Tools
Heli
Forum
Cell Threelevel
This Cell is designed to be driven by one of the 3-position switches. It outputs a value depending on the switch position.
| Field | Description |
| Input | The used Input Channel. |
| Out High | Value given if the input is above 65% |
| Out Center | Value given if the input is between -65% and +65% |
| Out Low | Value given if the input is below 65% |
Example
This Cell is intended to input any switching value into the system. If only one switch side shall be used, the center and one seide value can be set the same.