VStabi Pioneer of Flybarless

KISS 32A ESC´s in 3D Mode

The KISS ESC´s doe not learn the zero pont in 3D mode, so its required to set it manually. The zero of KISS is different from otehr oneshot125 implementations, so the zeros have to be adjusted.

After activating 3D MOde, go to the Expert mixer, and dial in the value -50 to the "Center = Mitte" field of all used mixers. This shifts the center to 174us which is the required value for KISS 32A ESC´s.

As always with programming ESC unmount the props until everything is set up correctly