VStabi Pioneer of Flybarless

As there are so many different tail servos on the market we have decided to provide a list of all information we have to set them up correctly in your VBar.

If your tail servo is not listed here please post the servo data in this forum thread. We will check from time to time and edit this list.

Important: Mind that there is a mandatory setting (center pulse) and an optional setting (frequency). If you have a servo not listet here, please research the specs and use the setting which comes closest, wide pulse (1,500 µsec) or narrow pulse (760 µsec) and the frequency next to the maximum your servo supports (but not higher). The pulse with must meet your servo's spec, else the center position will be off and the servo may take damage.

Our tests have revealed that a higher frequency than 333 Hz does not lead to any noticeable advantages in flight, so we have limited the max. frequency to 333 Hz.

Of course we were not able to get our hands on every tail servo on the market for a check, and so this list has to be seen as a suggestion w/o any warranty only. Please check a new tail servo for direction, center, force and endpoints before starting a flight!